Sharpened Disston D-8 panel saw. This is a nice little user. I had to hammer out a kink in this one. I got it pretty straight, but not perfect. It cuts a straight line without any trouble.
About refurbished saws from Bench & Chisel
All of my refurbished antique saws go through the following process:
- Saw is disassembled
- Saw bolts are cleaned
- Handle is gently cleaned
- Rust is removed from the blade by hand with sandpaper
- Kinks or bends are hammered out, if necessary
- Teeth are jointed, reshaped, set, and sharpened
- Blade is polished then waxed
- Saw reassembled
- Test cuts are made to ensure the saw performs as it should
- Wax is applied to be blade again to prevent rust and reduce friction when being used by its next owner.
This process results in a clean and usable saw that retains its antique look and feel.
