null Skip to main content

Sharpened Atkins No. 53 - 26", 9 ppi, Crosscut

E.C. Atkins & Co.

€181.44
Condition:
Refurbished
Adding to cart… The item has been added

This is an Atkins No. 53 from Pete Taran's personal collection. The plate and the handle are both in excellent condition, and I sharpened it to 9 ppi crosscut. It's ready to cut.

At a glance

Maker E.C. Atkins & Co.
Model No. 53
Length 26 inches
Plate 7-1/4" at the heel, 2-3/4" at the toe
Points per inch 9, crosscut
Medallion Deep set brass
Etch Good
Sharpened by Aaron Yes — ready to cut

What I did to it

  1. Disassembled and inspected. Every part came off the saw and was checked before cleaning.
  2. Cleaned to preserve character. Handle and hardware were cleaned in a way that keeps the saw's age visible — no over-polishing.
  3. Plate cleaned. Cleaned properly while preserving the etch.
  4. Jointed and shaped. Toothline jointed and refiled for crosscut work.
  5. Sharpened to 15° rake, 20° fleam. Standard general-use crosscut geometry.
  6. Set. Minimum set applied — just enough to let the plate glide in the kerf without binding.

Honest condition

The plate and the handle are both in excellent condition, and the etch is good. There is paint on the top horn of the handle. A previous owner most likely put it there to pick this saw out from the others in a shop or on a job site. It's part of the saw's working history, and the photos show it.

About the No. 53

The No. 53 was one of Atkins' regular-line handsaws. Atkins' 1937 catalog describes the No. 53 and the No. 65 as very good quality saws for everyday work, identical except for the style of blade. That makes it a saw built to be used by carpenters and cabinetmakers on the job, not a showpiece.

About Atkins

Elias C. Atkins started in business in Cleveland in 1855 and moved to Indianapolis the following year. The company, E.C. Atkins & Co., spent its early decades on lumber, mill and circular saws, and its hand saws start showing up in catalogs in the 1890s. Atkins marketed its steel as Silver Steel. The company stayed in the Atkins family until Borg-Warner bought it in 1952.

Who this saw is for

A woodworker who wants a quality vintage handsaw that's ready to use. A 26-inch, 9 ppi crosscut is a good size for cutting stock to length and general bench and cabinet work.

Questions about this saw? Email me at aaron@benchandchisel.com — I answer them all.
— Aaron, Bench & Chisel