This is a Disston D-15 Victory from Pete Taran's personal collection — the Victory, the top of Disston's handsaw line, with a rosewood handle and a 26-inch plate. I sharpened it and it's ready to cut.
At a glance
| Maker | Disston |
| Model | D-15 Victory (straight-back) |
| Approximate era | 1940–1947 |
| Length | 26 inches |
| Plate | 6-1/2" at the heel, 1-5/8" at the toe |
| Points per inch | 9, crosscut |
| Handle | Rosewood |
| Etch | Good |
| Sharpened by Aaron | Yes — ready to cut |
What I did to it
- Disassembled and inspected. Every part came off the saw and was checked before cleaning.
- Cleaned to preserve character. Handle and hardware were cleaned in a way that keeps the saw's age visible — no over-polishing.
- Plate cleaned. Cleaned properly while preserving the etch.
- Jointed and shaped. Toothline jointed and refiled for crosscut work.
- Sharpened to 15° rake, 20° fleam. Standard general-use crosscut geometry.
- Set. Minimum set applied — just enough to let the plate glide in the kerf without binding.
Honest condition
The etch is good. The photos show the rest of the saw's condition, and I'm glad to answer questions about any detail.
About the Victory
Disston introduced the D-115 in 1915 as the Diamond Jubilee saw, marking the company's 75th anniversary. It had a London Spring steel plate, a rosewood handle and an elaborate etch. Around the time the U.S. entered World War I, the etch was redesigned and the saw became the Victory. The D-115 has a skew-back plate; the D-15 is the same saw with a straight back.
Disston priced the Victory above the rest of its handsaw line. In the 1928 price list the D-15 sold for $5.85, against $4.50 for the D-12 and $3.45 for the D-8. In 1928 Disston also remodeled its whole line and offered the D-15 in a lightweight pattern, with a narrower plate and a reshaped rosewood handle. During WWII the Victory etch picked up the Morse code letter V. In the late 1940s Disston briefly switched the D-15 to a laminated handle, probably because of wood supply, and was back to rosewood by 1951. A rosewood D-15 from the 1940–1947 window is the wartime-era Victory with its original handle material.
About Disston
Henry Disston founded the company in Philadelphia in 1840, and by the late 1800s Disston was the largest saw maker in the world. Disston saws were the standard against which every other maker was measured for nearly a century.
Who this saw is for
A woodworker who wants the best handsaw Disston made in this era and plans to cut with it. A 26-inch, 9 ppi crosscut handles cutting stock to length and general cabinet work. It is also for a collector who wants a Victory with a good etch and a sharp plate.
Questions about this saw? Email me at aaron@benchandchisel.com — I answer them all.
— Aaron, Bench & Chisel