This D-8 comes from Pete Taran's personal collection. Pete spent decades hand picking saws that would be good candidates for restoration. It's been refurbished and it's ready to use. With this saw you get a genuine Disston without paying collector prices.
At a glance
| Maker | Disston |
| Model | D-8 |
| Approximate era | ca. 1947–1953 |
| Length | 26 inches |
| Plate | 6-3/4" at the heel, 1-3/4" at the toe |
| Points per inch | 10, crosscut |
| Medallion | Late-1940s nickel-plated medallion, ca. 1947–1953 |
| Etch | Good — clear and legible |
| Sharpened by Aaron | Yes — ready to cut |
What I did to it
- Disassembled and inspected. Every part came off the saw and was checked before cleaning.
- Cleaned to preserve character. Handle and hardware were cleaned in a way that keeps the saw's age visible — no over-polishing.
- Plate cleaned. Cleaned properly while preserving the etch.
- Jointed and shaped. Toothline jointed and refiled for crosscut work.
- Sharpened to 15° rake, 20° fleam. Standard general-use crosscut geometry.
- Set. Minimum set applied — just enough to let the plate glide in the kerf without binding.
Honest condition
Minor wear on the handle, and some staining on the plate. The etch is good — clear and legible.
About Disston
Henry Disston founded the company in Philadelphia in 1840, and by the late 1800s Disston was the largest saw maker in the world — the standard against which every other maker was measured for nearly a century. The D-8 was their everyday professional-grade hand saw — solid, working-grade construction priced for the carpenters and cabinet makers who used them daily.
Who this saw is for
A woodworker who wants a Disston-quality saw at an affordable price, freshly sharpened and ready to use. 10 points per inch sits right between coarse and fine — good for all-around work.
Questions about this saw? Email me at aaron@benchandchisel.com — I answer them all.
— Aaron, Bench & Chisel
